3" Low Voltage Housing

Description

RLV3X:50W/MR16
RLV3X/75:75W/MR16
RLV3XGU10 : 50W/GU10
NON-IC HOUSING

• For non-insulated ceilings or where insulation can be kept "3" from housing

Housing features

• Housing with thermal protector.
• Housing are available with either 120V or 277V input and 50 or 75W output in any combination.
• 120V Line Voltage for GU10 Lamp
• Hangerbars at any point within a 24" joist span with optional T-bar clip.
• Juction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex pry out slots.

Installation Feature

• Opening : 3 1/4"
• Height : 4 1/2"
• Cutout hole size : 3 5/8"
• Housing can be adjusted in plaster frame for juntion box access.Housing accepts 5/8" ceiling thickess only.

Listing

• UL Damp Location
• UL Feed Through
• CSA Certified

Dimensions

Description

RRLV3X:50W/MR16
RRLV3X/75:75W/MR16
RLV3XGU10 : 50W/GU10
REMODEL HOUSING

• For non-insulated ceilings or where insulation can be kept "3" from housing

Housing features

• Housing with thermal protector.
• Housing are available with either 120V or 277V input and 50 or 75W output in any combination.
• 120V Line Voltage for GU10 Lamp
• Juction box is listed for through branch circuit wiring and has six 1/2" knockouts with true pry-out slots.
• Four romex pryouts simplify Romex installation.
• Three Remodeling clips secure housing and accommodate various ceiling thickness.

Installation Feature

• Opening : 3 1/8"
• Height : 4 1/2"
• Cutout hole size : 3 5/8"
• Two Remodel clips secure

  housing and accommodate ceiling thickness from 3/8" t0 5/8".

Listing

• UL Damp Location
• UL Feed Through
• CSA Certified

Dimensions

Description

RLV3XIC:35W/MR16
RLV3XICGU10:35W/GU10
IC Housing

• For insulated ceilings and dircet contact with insulation
• RLV3XIC is AIR-TITE and prevents airflow between attic and living areas The AIR-TITE construction of the RLV3XIC limits air exchange between the plenum and heated or air conditioned areas.

Housing features

• Housing with thermal protector.
• Double wall housing contruction.
• Housing are available with either 120V or 277V input and 50 or 75W output in any combination.
• 120V Line Voltage for GU10 Lamp
• Hangerbars at any point within a 24" joist span with optional T-bar clip.
• Juction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex pry out lots.Romex knock outs include built in strain relief and require no additional clamps.

Installation Features

• Opening : 3 1/4"
• Height : 7"
• Cutout hole size : 3 5/8"
• Housing can be adjusted in plaster frame for juntion box access.
  Housing accepts 5/8" ceiling thickess only.

Listing

• UL Damp Location
• UL Feed Through
• CSA Certified
• IP Rated

Dimensions